Temperaturkalibrierung
The best/proper method to clean your infrared calibrator target
The black body paint on the target of yourinfrared calibratoris very delicate. To remove the dust or debris from the paint, the only thing you can do is use compressed dry air. The dry air must have no oil and no water in the line or hose. Use a filter on an air hose to remove the oil and an air dryer to remove the water. Have the compressed air set to about 100 psi.
Some items like compressed air in a can will contain a propellant that will spray out. Be careful with these products.
Test the air against a piece of paper or cardboard. If you can see any spots of any liquid, do not use. Try a different source.
DO’s and DON’T’s
- Do not use any chemical on the black body target.
- Do not attempt to repaint the target.
- Do not wipe the target
- Do use the target cover when not using the target
- Do use the target cover for transporting the unit
If the IR target gets contaminated
If the target does get contaminated, the block will need to be replaced. It cannot be repainted, touched up, or resurfaced. The painting process is very delicate. During the process, we sandblast the surface, put it through a chemical wash, rinse, dry for several hours, paint, and then bake the paint for 4 hours.
Get help
Speak with a calibration expert
Chatten Sie mit unseremFluke Assistenten
Chat löschen
Kontakt
10% Rabatt
'; // Append the new message element at the end of the container const botCon = document.querySelector('.bot-message-container'); botCon.appendChild(messageElement); scrollToBottom();}/* Create a helper function to monitor when the bot-content container height is increased. As it is increasing, the winder should scroll with it. */function scrollToBottom() { const botContent = document.querySelector('.bot-content'); botContent.scrollTop = botContent.scrollHeight;}/* Create a helper function for the intro text. This is the first messages found in the bot bot-intro. It is also re-added when we use the clear button */function addInitialBuzz(path) { const botContainer = document.querySelector('.bot-container'); // If the locale storage item buzzLastState is set, we want to set the bot container to that state const lastState = localStorage.getItem('buzzLastState'); if (lastState) { botContainer.className = lastState; } // Path customization getPathCustomization(path); // If the localStorage has chatMessages, replace the bot-message-container with the saved messages instead of any intro text const chatMessages = localStorage.getItem('chatMessages'); if (chatMessages) { const botCon = document.querySelector('.bot-message-container'); botCon.innerHTML = chatMessages; return; } else { // The intro text is added to the bot-intro element const introText = document.querySelector('.bot-intro'); introText.innerHTML = `Hallo, ich bin Ihr virtueller Fluke Assistent. Ich bin ein Chatbot, aber ich werde mein Bestes tun, um Sie bei der Suche nach Produktinformationen und anderen Ressourcen von Fluke zu unterstützen. Sie können mich alles fragen!
Beachten Sie dabei bitte Folgendes:
- Die von mir generierten Informationen können gelegentlich fehlerhaft sein. Ich bin nicht dazu bestimmt, Beratungen durchzuführen.
- Bei Fragen zur Verwendung und zur Sicherheit von Fluke Messgeräten lesen Sie stets die Produkthandbücher und Sicherheitsblätter.
- Sie müssen die Sicherheitsstandards Ihres Unternehmens einhalten und die erforderliche Schulung erhalten, bevor Sie Fluke Messgeräte verwenden oder elektrische und andere Messungen durchführen.
- Wenn Sie mit einem Mitarbeiter sprechen möchten, besuchen Sie unsere Kontakt-Seite oder nutzen Sie das Kontakt zu Sales-Formular.
- Informationen zu unserem Umgang mit personenbezogenen Daten finden Sie in unserer Datenschutzrichtlinie.
`; // Promps are and additional message that can be added to the chat window. They are added after the intro text, and addPrompts(path); }}/* Create a helper function to add prompts to the chat window * Prompts are bot messages appended after the into text for specific paths.*/function addPrompts(path) { const validLocales = ['en', 'en-us', 'en-ie', 'en-gb', 'en-ca']; // Example usage if (!isValidHostAndLocale(validLocales)) { // Return the unmodified message if the host or locale is invalid. return; } const botCon = document.querySelector('.bot-message-container'); // Check if a bot-prompts already exists const existingPrompt = botCon.querySelector('.bot.bot-prompts'); if (existingPrompt) { return; } // If path is 6 characters or less, it is assumed to be the homepage if (path.length <= 6) { path = 'home'; } let message; switch (path) { case 'home': message = "
How can I help you today?
" + "
I want to learn more about a product
" + "
I want to purchase a product
" + "
I am looking for product support
" + "
What's new?
"; break; case '/en-us/products/electrical-testing/best-solar-energy-industry-tools': message = "
Thanks for checking out Fluke's solar solutions! How can I help you today?
" + "
I want to learn more about a Fluke solar product(s)
" + "
I want to purchase a product for my solar application
" + "
"; break; case '/en-us/products/calibration-tools/temperature-calibrators': message = "
Thanks for checking out Fluke's Temperature Calibration solutions! How can I help you today?
" + "
I want to learn more about a Fluke Temperature Calibration product(s)
" + "
I want to learn more about Temperature Calibration
"; break; default: return; } const messageElement = document.createElement('div'); messageElement.classList.add('bot', 'bot-prompts'); messageElement.innerHTML = message; botCon.appendChild(messageElement);}function getPathCustomization(path) { const validLocales = ['en', 'en-us', 'en-ie', 'en-gb', 'en-ca']; // Example usage if (!isValidHostAndLocale(validLocales)) { // Dont attempt to fire any path customization if the host or locale is invalid. return; } if (path.length <= 6) { const lastState = localStorage.getItem('buzzLastState'); if (lastState) { return; } botTransitionMid(); scrollToBottom(); // Handle the case when the path is less than 6 characters } else if (path.includes('search/fluke')) { const lastState = localStorage.getItem('buzzLastState'); if (!lastState) { botTransitionMid(); } // Get the content of input.alg-search-input. We'll use this instead of query params because they are more accurate. let searchInput = document.querySelector('input.alg-search-input'); let botInput = document.getElementById('user-input'); // Function to build and insert CTA function buildAndInsertCta(searchValue) { let algoliaContainer = document.querySelector('.alg-full-results'); let builtCta = "
Try the Fluke assistant to learn more about \"" + searchValue + "\"
"; algoliaContainer.insertAdjacentHTML('afterbegin', builtCta); botInput.value = "Please tell me more about " + searchValue; } // If the search input has a value, we want to update the CTA and the bot input field if (searchInput) { // Now find the algolia container we will be adding the CTA to let algoliaContainer = document.querySelector('.alg-full-results'); // If the container exists, we place the CTA and update the value if (algoliaContainer) { // Check to see if .buzz-algolia exists. If it does, we want to update the CTA and the bot input field let existingCta = document.querySelector('.buzz-algolia'); if (!existingCta) { buildAndInsertCta(searchInput.value); } } // Additionally, when the input changes we change the CTA and the bot input field to keep them in sync searchInput.addEventListener('input', function () { let currentCta = document.getElementsByClassName('toc-cta')[0]; if (currentCta) { currentCta.innerHTML = "Try the Fluke assistant to learn more about \"" + searchInput.value + "\""; botInput.value = "Please tell me more about " + searchInput.value; } else { buildAndInsertCta(searchInput.value); } }); // If .buzz-algolia exists, we are gonna add a click event listener to the button let algoliaCta = document.querySelector('.toc-cta'); if (algoliaCta) { algoliaCta.addEventListener('click', function () { // If the bot-container isnt bot-mid or bot-full, we want to transition to bot-mid if (!document.querySelector('.bot-container').classList.contains('bot-mid')) { botTransitionMid(); } sendMessage(botInput.value); // Clear the input field botInput.value = ''; }); } } // Handle the case when the path contains 'search/fluke' } else if ( path.includes('products/electrical-testing/digital-multimeters') || path.includes('en-us/products/calibration-tools/temperature-calibrators') || path.includes('en-us/products/electrical-testing/best-solar-energy-industry-tools') ) { const lastState = localStorage.getItem('buzzLastState'); if (lastState) { return; } botTransitionMid(); scrollToBottom(); // Handle the cases when the path contains specific products }}function getOrGenerateChatId() { let chatId; chatId = localStorage.getItem('chatId'); // If chatId does not exist in localStorage, generate a new one if (!chatId || chatId === '') { chatId = 'chat-' + Date.now() + '-' + Math.floor(Math.random() * 1000); localStorage.setItem('chatId', chatId); } return chatId;}// Clear chat functionfunction clearMessages(path) { localStorage.removeItem('chatMessages'); localStorage.removeItem('chatId'); localStorage.setItem('chatQuestion', 0); // Reset to 0 localStorage.removeItem('buzzLastState'); chatId = getOrGenerateChatId(); sendDataLayer({ 'event': 'chat_bot_event', 'chatId': localStorage.getItem('chatId'), 'reponseCount': localStorage.getItem('chatQuestion'), 'requestType': 'clear_chat' }); const botCon = document.querySelector('.bot-message-container'); // After clearing the chat we want to remove the innerHTML of the bot-message-container, and add the intro text again botCon.innerHTML = "
"; addInitialBuzz(path);}function appendSentiment(thumbs, chatId, chatDialogId) { const botCon = document.querySelector('.bot-message-container'); const lastBotMessage = botCon.querySelector('.bot:last-of-type'); if (thumbs) { const botRatingDiv = document.createElement('div'); botRatingDiv.classList.add('bot-rating'); // Insert bot rating div after lastBotMessage lastBotMessage.parentNode.insertBefore(botRatingDiv, lastBotMessage.nextSibling); // Insert buttons inside bot rating div botRatingDiv.innerHTML = ` `; const thumbupElements = botRatingDiv.querySelectorAll('.thumbup'); const thumbdownElements = botRatingDiv.querySelectorAll('.thumbdown'); thumbupElements.forEach((thumbup) => { thumbup.addEventListener('click', function () { chatRating = 1; this.classList.add('responded'); thumbdownElements.forEach((thumbdown) => thumbdown.classList.add('responded-alt')); thumbupElements.forEach((thumbup) => thumbup.style.pointerEvents = 'none'); thumbdownElements.forEach((thumbdown) => thumbdown.style.pointerEvents = 'none'); // Call your sendRating function with appropriate parameters sendRating(chatRating, chatId, chatDialogId) }); }); thumbdownElements.forEach((thumbdown) => { thumbdown.addEventListener('click', function () { chatRating = -1; this.classList.add('responded'); thumbupElements.forEach((thumbup) => thumbup.classList.add('responded-alt')); thumbupElements.forEach((thumbup) => thumbup.style.pointerEvents = 'none'); thumbdownElements.forEach((thumbdown) => thumbdown.style.pointerEvents = 'none'); // Call your sendRating function with appropriate parameters sendRating(chatRating, chatId, chatDialogId) }); }); }}// Function to send user message to Azure Chatbotfunction sendRating(chatRating, chatId, chatDialogId) { const endpoint = 'https://flk-delphiapi-sitegpt-prd-001.azurewebsites.net/v1/chat/ratings'; const payload = { chatId: chatId, dialogId: chatDialogId, chatRating: chatRating, }; const headers = { 'Content-Type': 'application/json', 'Ocp-Apim-Subscription-Key': '078db2f23dcb4b23a5cb1b6255fc08c8', }; // Add this line at the beginning of your function to record the start time const startTime = new Date(); fetch(endpoint, { method: 'POST', headers: headers, body: JSON.stringify(payload), }) .then(response => { if (!response.ok) { throw new Error(`HTTP error! status: ${response.status}`); } return response.json(); }) .then(data => { if (data) { console.log('sent rating ' + chatRating + ' for question ' + chatDialogId); } }) .catch(error => console.error('Error:', error));}function cloudflareTestingPortal(botResponse, timeTakenInSeconds, payload, dataLayerObject) { //Get the hostname const hostname = window.location.hostname; // If the hostname is uat-gpt.fluke.com, add a console message if (hostname === 'uat-gpt.fluke.com') { // Add the botResponse, timeTakenInSeconds, payload, and gtm the respective containers // last-message-right, last-response-right, data-layer-right, payload-right const lastMessageRight = document.querySelector('#last-message-right'); const lastResponseRight = document.querySelector('#last-response-right'); const dataLayerRight = document.querySelector('#data-layer-right'); const payloadRight = document.querySelector('#payload-right'); lastMessageRight.innerHTML = botResponse; lastResponseRight.innerHTML = timeTakenInSeconds; dataLayerRight.innerHTML = JSON.stringify(dataLayerObject); payloadRight.innerHTML = JSON.stringify(payload); }}// We need to pass datalayer stuffies.function sendDataLayer(data) { // Function for event tracking window.dataLayer = window.dataLayer || []; window.dataLayer.push(data);}// For global launch, we are only supporting en-us for many of the Kaizen specific features. function isValidHostAndLocale(validLocales) { // Get the hostname - currently only supported on *.fluke.com. The first path segment is the lang-locale, and we are only supporting en-us at launch const hostname = window.location.hostname; const path = window.location.pathname; const langLocale = path.split('/')[1]; // If the hostname is not 'www.fluke.com' or 'regression.fluke.com', or the langLocale is not in the validLocales array, return false if ((hostname !== 'www.fluke.com' && hostname !== 'regression.fluke.com') || !validLocales.includes(langLocale)) { return false; } // If the hostname and langLocale pass the conditions, return true return true;}